Honeywell International Inc. CS19A Manuale Utente

10 - 1

This selection allows you to turn on transmission of a Code I.D. before the 

decoded symbology.  (See the 

 beginning on page A-1) for 

the single character code that identifies each symbology.)  This action first 

clears all current prefixes, then programs a Code I.D. prefix for all symbologies.  
This is a temporary setting that will be removed when the unit is power cycled.

Scan the bar code below to output the decoder revision.

Scan the bar code below to output the scan driver revision.  The scan driver 
controls image capture.

Scan the bar code below to output the current software revision, unit serial num-
ber, and other product information for both the scanner and base.

Preliminary Draft