Honeywell International Inc. CS19A Manuale Utente

4 - 1

The scanner can be programmed to beep when it’s powered up.  If you are 

using a cordless system, the base can also be programmed to beep when it is 
powered up.  Scan the Off bar code(s) if you don’t want a power up beep.  

Default = Power Up Beeper On - Scanner.

You may wish to force the scanner to beep upon a command sent from the host.  
If you scan the Beep on BEL On bar code below, the scanner will beep every 
time a BEL character is received from the host.  

Default = Beep on BEL Off.

Preliminary Draft