Honeywell International Inc. CT50L0N Manuale Utente

1 Tap All Apps > Settings.

2 Tap Backup & Reset.

3 Tap Factory Data Reset.

4 Select any options you want to include, such as erasing the SD card.

5 Tap Reset phone. The CT50 performs the clean boot procedure and 

turns off.

6 Press the Power button to turn on the CT50. You will need to set up 

your computer again.

To keep the computer in good working order, you may need to clean the 
scanner window, color camera window, and the touch screen. Clean the 
windows and the touch screen as often as needed for the environment in 
which you are using the computer. The CT50 will withstand application of 
the following cleaning agents when applied to a clean soft cloth and 
removed immediately with a dry soft cloth:

Acetic acid, 10% in water

Ethyl alcohol, 10% in water

Mild soap solutions

1 Press the Power button to suspend the computer.

2 Dip a clean cloth towel in the cleaning agent and wring out the 

excess.

3 Wipe off the scanner window, camera lens, and flash area. Do not 

allow any abrasive material to touch these surfaces.

4 Wipe dry.

5 Let the computer completely air dry before using again.

Note: Honeywell recommends that you leave the battery installed when 
you clean the computer. Leaving the battery installed helps prevent fluids 
from entering the computer through the SIM card and microSD card 
connectors,