Honeywell International Inc. CV31A1 Manuale Utente
Chapter 1 — About the Computer Features
CV31 Data Collection Computer User Manual
13
Configure the Bar Code Slot Reader
If you installed the bar code slot reader (Model AR3) accessory, you
need to enable and configure it before you can use it.
need to enable and configure it before you can use it.
1
Tap
Start > Settings > Control Panel > Intermec Settings.
2
Tap
Data Collection > Tethered Scanner (COM3) > Scanner
Settings.
3
Tap
Scanner Model.
4
From the list, select
ID Tech Slot Scanner.
5
Select
Enable Scanner Port.
6
Tap
OK.
7
Tap
Data Collection > Tethered Scanner (COM3) >
Symbologies.
8
Only enable the symbologies that you plan to read.
Install an SD Card
Use an SD card to increase file storage or install software. The
computer resets when you install or remove an SD card.
computer resets when you install or remove an SD card.
1
Press and hold the
Power button for more than 8 seconds to turn
off the computer.
2
Disconnect the power cord from the computer.
3
Use a Phillips screwdriver to remove the six screws that secure the
radome cover.
radome cover.