Honeywell International Inc. EDA703 Manuale Utente

User Guide for ScanPal Series Terminal

 

47

 

 

The phone function of the terminal is realized with a speaker and a microphone. The phone 
function also supports a Bluetooth headset or hands-free device. The EDA70 will use 
loudspeaker mode without connecting bluetooth headsets or other external audio devices. 
The phone function is enabled by default. 

This terminal supports the following network types: 
• GSM&EDGE：Band2/Band3/Band5/Band8 
• WCDMA：Band1/Band2/Band4/Band5/Band8 
• FDD-LTE：Band1/Band2/Band3/Band4/Band7/Band20 
When users enable the phone function and activate the service through wireless carriers, 
they can customize the phone features and network settings in the Mobile Network 
interface in Settings. 

Note: EDA70-3 WWAN version supports automatic system time setting with network 
messages and timezone messages (NITZ). 

 

Calls can be activated by inserting Micro SIM card in the terminal. Micro SIM card can be 
purchased from the network service provider. 

1.    Turn off the terminal. 
2.    Press down the battery cover safety button to move the lock to the unlock position at 

right; 

3.    Unlock the battery cover using its lock handle; 
4.    Remove the battery (remove it from its bottom end before pulling it out); 
5.  Open the cover of SIM card slot. 
6.    Insert the SIM card from the SIM card slot until hearing a click. 
7.  Press down the cover of SIM card. 
8.   Insert the battery (Insert the connector side first, then press the battery down to 

establish connection between the battery and the phone). 

9.   Press down the battery cover (Insert the connector side first, then press down the 

battery cover). 

10.   Move the battery cover safety lock to the lock position at left. 
11.   Turn on the terminal.