Honeywell International Inc. EDA703 Manuale Utente
Chapter 6: Configuring Terminal
58
User Guide for ScanPal Series Terminal
Network communication
Users can connect the terminal to wireless and wired networks. Users can get the terminal
connected via the following ways:
connected via the following ways:
• 802.11 radios
• Bluetooth
• USB
Connecting to Wi-Fi networks
When communicating through wireless networks, GEDA70-X transfer data through 802.11
radios. Before connecting to a Wi-Fi network, users need to know the Security Protocol of
the network and the certificates it required. Usually, 802.11 radio is disabled by default.
radios. Before connecting to a Wi-Fi network, users need to know the Security Protocol of
the network and the certificates it required. Usually, 802.11 radio is disabled by default.
1. Enter
Settings>Wi-Fi.
2. When the WLAN switch turns blue, tapping the WLAN bar will display the detected
network list.
3. To quickly connect to a network via WLAN Protected Access (WPS), tap . To
search the network outside of the list, slide to the end of the list and tap Add network
and enter the network name.
and enter the network name.
4. Tap on a network name to view its details.