Honeywell International Inc. IM11PRT Manuale Utente

You can connect the development kit to your PC through serial or 
USB communications and use it to perform these tasks:

Establish a BRI session.

Use the JRFID application.

Restore default settings.

Use a serial communications program, such as Hyperterminal, to 
communicate with the module. 

If you have Microsoft ActiveSync running on your desktop PC, 
disable ActiveSync to make the serial port available.

Connect the RFID module and antenna cables to the development 
board.

Connect the antenna to the first antenna port.

Connect the serial cable from the COM 1 port on the development 
board to the serial port on your PC.

Start the communications program.

Configure the communications parameters to:

Bits per second: 115200

Data bits: 8

Parity: None

Stop bit: 1

Flow control: None

Send line ends with line feeds: Enabled

Note: If you do not have a communications program, you can 
download a trial version of HyperTerminal for Windows 7 at 

.