Honeywell International Inc. IM14 Manuale Utente
14
IF2 Network Reader
Configure Ethernet Settings
This section explains how to configure wired Ethernet settings using the web
browser interface.
browser interface.
If you are using a DHCP server, you may not need to configure Ethernet settings.
For more information, contact your network administrator.
For more information, contact your network administrator.
Step 1.
From the menu, click Network Configuration or Ethernet in the left
pane. The Ethernet screen appears.
pane. The Ethernet screen appears.
If DHCP is enabled, you see this screen:
If DHCP is disabled, the current values for IP address, subnet mask, and router
appear in entry fields:
appear in entry fields:
Step 2.
Configure the Ethernet settings. For help, see the next table.
Note: Different settings appear in this screen depending on the current DHCP mode for the
IF2.
If you need to configure other network settings such as DNS addresses and suf-
fixes or a SYSLOG destination, see
fixes or a SYSLOG destination, see