Honeywell International Inc. IM14 Manuale Utente

If you are not using a password server to authorize user logins, Intermec recom-
mends that you change the default user name and password and create a read-
only password.

Step 1.

From the main menu, click Security > Passwords. The Passwords screen 
appears.

Step 2.

Make sure the Enable RADIUS check box is not checked. Clear this check 
box if necessary and then click Activate Changes.

Step 3.

Configure the parameters. For help, see the next table.

Step 4.

Click Activate Changes to save your changes and immediately make 
them active.

Username

Enter the user name you need to use to log in to this IF2. The user name 
can be from 1 to 32 characters long. You must always specify a user 
name. Default is intermec.

Password

Enter the password you need to use to log in to this IF2. This password 
gives you read and write access to the IF2 configuration. The password 
can be from 8 to 32 characters long. You must always specify a password. 
Default is intermec.

Read-only Password

Enter the password you need to use to log in to this IF2. This password 
gives the user read-only access to the IF2. This user can view the 
configuration and execute diagnostics but cannot perform any tasks that 
affect IF2 operation, such as changing configuration options or 
upgrading firmware. Default is readonly.
The read-only password cannot be deleted. To disallow read-only access, 
you need to enable RADIUS authentication. For help, see