Honeywell International Inc. SF61B-A Manuale Utente

Pair your SF61B with your EasySet host PC and connect it using 
one of the following methods described in Chapter 2:

for an HID connection: see 

 (with HID, pairing and connection are simultaneous)

for a host-initiated (Outgoing) SPP connection: see 

Start EasySet and select the SF61B product (

Handheld scanners > SF61B).

If the Select product dialog box does not appear, choose 

Select or click on the product icon in the upper left corner of the 
EasySet window.

Select 

Communication > Select communication interface. The 

Device Selection dialog box appears.

Select the connection channel corresponding to the connection 
method you have chosen (Bluetooth Keyboard for an HID 
connection or the Outgoing virtual COM port for a host-initiated 
SPP connection) and click 

OK.

EasySet connects to your scanner and displays your scanner’s 
current configuration settings in blue next to the commands. 

These settings are indicated by a blue check mark or blue text.

Open the folders in the EasySet commands window to find the 
configuration commands you need and double-click each 
command to send it to your scanner.

Note: In the following procedure you will use one of the following 
methods to connect your scanner to EasySet for online setup:

HID Bluetooth connection

host-initiated (Outgoing) SPP Bluetooth connection

Note: The scanner does not beep when you send configuration 
commands online from EasySet. It powers off when you select 
Disconnect from the Communication menu in Easyset.