Honeywell International Inc. 610002 Manuale Utente

2 - 2

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-
Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.  
DO NOT attempt to charge damp/wet mobile computers or batteries.  All components must be dry 
before connecting to an external power source

.

The terminal begins booting as soon as power is applied and runs by itself. Do NOT press any keys or 
interrupt the boot process. 
When the boot process is complete, the Desktop appears, and the terminal is ready for use. 

6100s ship with both the main battery pack and 
internal backup battery significantly discharged of 
power. Charge the main battery pack with the 
Dolphin charging cable for a minimum of 4 or 6 
hours depending on your battery before initial 
use.
1.

Attach the appropriate plug adapter to the 
plug of the power cable.

2.

Insert the plug into the appropriate power 
source.

3.

Plug the Dolphin power cable into the 

DC

Power Jack

 (see page 3-11) on the bottom 

end of the unit. 

Note:  If you remove the battery pack or it completely 

discharges, there is a 30 minute window in which 
to insert a charged battery pack before the 
backup battery completely discharges.  If your 
backup battery completely discharges, the 
contents of the RAM memory will be lost.  If your 
backup battery is less than fully charged, there is 
a proportionally smaller window of time available.

Red LED On

Charging

Green LED On

Battery is full or fully charged

!