Honeywell International Inc. 6500LP Manuale Utente

2 - 2

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-
Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty.  

  

DO NOT attempt to charge damp/wet mobile computers or batteries.  All components must be dry 
before connecting to an external power source

.

*The power adapter on the power cable converts the voltage from the power source to 5 volts DC. Only 
power adapter cables from Honeywell convert the voltage appropriately. The power cable contains a plug 
adapter for each geography (US, UK, EU, etc.).    

Dolphin 6500s ship with both the main battery pack 
and internal backup battery significantly 
discharged of power. Charge the main battery 
pack with the Dolphin charging cable for a 
minimum of 6 hours.
1.

Attach the appropriate plug adapter to the 
plug of the power cable.*

2.

Insert the plug into the appropriate power 
source. 

3.

Plug the Dolphin power cable into the 

DC 

Power Jack

 (see page 3-10) on the bottom 

end of the unit. 

Note:  If you remove the battery pack or it completely 

discharges, there is a 30 minute window in which 
to insert a charged battery pack before the 
backup battery completely discharges.  If your 
backup battery completely discharges, the 
contents of the RAM memory will be lost.  If your 
backup battery is less than fully charged, there is 
a proportionally smaller window of time available.

Red LED On

Charging

Green LED On

Battery is fully charged

!

Power Adapter

Plug Adapter

Power Cable