Honeywell International Inc. 760004 Manuale Utente

3 - 25

There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. 

A soft reset re-boots the terminal without losing RAM data. You would perform a soft reset 1) when the 
terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making 
changes to certain system settings.

1.

Press and hold Red 

 + ESC 

 for approximately 5 seconds. The screen turns white and the 

decode and scan LEDs flash for approximately three seconds. 

2.

When the reset is complete, the 

A hard reset erases all of the data and applications stored in RAM memory and launches AutoInstall, which 
re-initializes the terminal.

Hard resets automatically launch a soft reset as part of the boot process.

1.

Press and hold Red 

 + TAB 

 for approximately 5 seconds. The screen turns white and the 

decode and scan LEDs light for approximately three seconds. 

2.

The terminal re-initializes, which re-installs all programs stored in the \IPSM\Autoinstall folder.

Note: Set the time and date after each hard reset to ensure that the system clock is accurate. Tap the date on the 

!