Manualsbrain.com
  1. Manuali
  2. Marche
  3. Honeywell International Inc.
  4. 7850LPE
  5. Manuale Utente

Honeywell International Inc. 7850LPE Manuale Utente

Scarica
Pagina di 116
7 - 2
Default Com Port Assignments
The Dolphin terminal ships with the com ports assigned as follows: 
Installing Additional Software
Dolphin terminals ship with the operating system, radio drivers, and custom Hand Held Products software loaded onto the device. 
These are the default programs that install when your terminal first boots up. You can install additional software programs to the 
terminal provided that the following parameters are met:
•
the software program was created for a Windows Mobile device.
•
The terminal has enough memory to store and run the program.
•
The program has an *.exe, *.cab, or *.dll extension. 
www.microsoft.com/windowsmobile/products/pocketpc/
When selecting programs, verify that the program and version of the program are designed for the Windows Mobile 5.0 and the 
terminal’s processor. You can verify your processor by tapping Start > Settings > System tab > About > Version tab. Make a note 
of the information in the Processor field. 
To install additional software, you can use the communication options described in this chapter.
See,
•
•
•
Com Port
Assignment
1
Serial port; this is the 17-pin mechanical connector on the bottom panel. 
See 
2
Bluetooth Module 
If there is no Bluetooth hardware installed on the terminal, this com port is unassigned.
3
Raw Infrared
4
Unassigned
5
USB virtual serial port
6
IrDA, if IrDA is enabled. If IrDA is disabled, this com port becomes available. 
See 
7, 8, & 9
Unassigned
These are virtual com ports that are available for selection only when connecting to devices that 
use virtual com ports, such as Bluetooth.
!