Honeywell International Inc. 7850PGE Manuale Utente

There are two ways to reset the Dolphin terminal: a soft reset and a hard reset. 

A soft reset re-boots the device without losing RAM data. You would perform a soft reset 1) when the 
terminal fails to respond, 2) after installing software applications that require a reboot, or 3) after making 
changes to certain system settings.

1.

Press and hold the Red 

 + ESC 

 keys for approximately five seconds. The screen turns white 

and the decode and scan LEDs flash for approximately three seconds. 

2.

When the reset is complete, the Today screen appears.

1.

Press and hold the Red 

 + Tab 

 keys for approximately five seconds. The screen turns white 

and the decode and scan LEDs light for approximately three seconds. 

2.

The terminal re-initializes; see 

Set the time and date after each hard reset to ensure that the system clock is real-time. Tap the date on 
the Today screen to open the Clock and set the time and date. 

Suspend mode suspends terminal operation. The terminal appears to be “off” when in suspend mode.

The terminal is programmed to go into suspend mode automatically when inactive for a specific period of 
time. You can set this time period in the Power setting. For details, see the Advanced Tab section of the 

 (see page 6-12) setting.

Press the Blue 

 + Backlight 

 keys. You should put the terminal in suspend mode when you change 

the battery pack; see 

To resume terminal operation (or “wake” the terminal), 

• Press the Backlight key 

.

• Press the 

!