Honeywell International Inc. 7850PGE Manuale Utente

Establishing the terminal on a wireless network depends heavily on your network infrastructure. You will 
need specific information from your network administrator.

Whatever your network specifics, some general steps apply:

1.

The on-board radio drivers must be enabled for the terminal to transmit a signal. Verify the radio’s 
status in the 

2.

Enter the appropriate configuration settings for each radio installed. Each radio has its own 
configuration program.

•

For details about configuring the WLAN radio, refer to the Honeywell WLAN Security Supplement User’s 

www.honeywell.com/aidc

.

•

For details about Bluetooth radio, see 

This method uses an external modem rather than a wireless radio. For instructions, see 

Proxy Server 

Connections

 on page 

7-11.

When you have established a network connection (via modem or wireless radio), you can access the 
Internet and download additional software programs.

1.

Verify the terminal’s processor by tapping Start > Settings > System tab > About > Version tab. 
Make a note of the information in the Processor field. 

2.

Open Pocket Internet Explorer and navigate to the program’s location. You may see a single *.exe 
or setup.exe file, or several versions of files for different device types and processors. 

3.

Select the program version that matches the terminal and processor. 

4.

Read any installation instructions provided by the program, such as Read Me files or other 
documentation. Many programs provide special installation instructions.

5.

Download the program to the terminal straight from the Internet.
You would normally store the program in the 

 folder unless another location is 

required by the program. 

6.

On the terminal, tap the installer file, often an*.exe file.

7.

The installation wizard for the program begins. 

8.

Follow the directions on the screen to complete installation.

!