Honeywell International Inc. 7900L0P Manuale Utente

SIM stands for Subscriber Information Module. A SIM card stores the subscriber's personal information, GSM/GPRS radio 
settings, security key, contacts, etc. SIM cards can be installed and removed from compatible mobile devices, enabling you to 
switch devices without losing your personal information. SIM cards are obtained and activated by the network provider that 
supports your GSM/GPRS network. 

Before installing the SIM card:

•           The SIM card must be activated by the service provider.
•           The terminal must be powered down.

On the Dolphin 7900 terminal, the access door is located on the left, side panel; see 

Note: The access door on the left side panel is not user-accessible in the field. A special Torx T8 tool from HHP is required to 

loosen the screws; HHP part number 100001024.

1. Obtain HHP part number 100001024.

2. Power down the terminal and lay it down on a flat surface.

3. Unscrew the faceplate of the access door. 

4. Insert your SIM card. 

5. Place the SIM card door over the secured SIM card.

6. Secure the faceplate.

7. Power on the terminal to verify that the SIM card is working.

Note: If the SIM card is not installed properly, the Dialler screen will indicate that no SIM card is installed.

Do NOT power on the device with the SIM card installed and the access door still open. You must secure the faceplate 
before you power on the device. Failure to do so will could result in damage to the terminal and will void the warranty.