Honeywell International Inc. 950003 Manuale Utente

1. Tap on the Bluetooth icon.  In the pop-up menu, tap Transfer via Bluetooth | Enable File Sharing.

2. The Enable File Sharing status screen will appear.  Your mobile computer will wait two minutes for the remote device to 

connect.

3. After successfully connecting to the remote device, the screen will report Connected.

4. If two minutes passes before you connect, tap Wait Again.

5. File sharing will be enabled until you end it by tapping Cancel.

This section explains how to assign a dialing prefix and use the Dialer to dial a number directly from your Contacts list.  The Dialer 
makes it quick and easy to perform dial-up networking.

If you have not done so already, be sure to run the Dialer Installer from the Bluetooth Card Installation CD.  While installing the 
program, you can also assign the dialing prefix.

Note: The Dialer has been verified to work with Nokia and Ericsson phones and is known not to work with the Motorola 270c, 
NTT Docomo Paldio 633S or Sony au C413S phone.  Results may vary with other phones that are not listed as being supported 
by the Bluetooth system.

If you have not already assigned a dialing prefix during the install process, you can do so by following these steps:

1. Go to Start | Settings | System.  Tap on Dialer.

2. Select the appropriate Dialing Prefix, then tap ok.