Honeywell International Inc. 950009 Manuale Utente

•

In the Identity field, enter your network login or user name.

•

In the Password field, enter your network password.

•

If your network requires client certificates, select the Use certificate option and complete the information.

•

If the Authentication Type is PEAP or TTLS, select the Tunneled authentication option and enter the appropriate 

Identity, Password, and Protocol.

4. For most installations, you would skip the System tab, which controls system logging of network problems. Unless your set-

up requires custom logging, accept the default logging settings. For more information, see 

5. Tap the Server tab. 

6. Depending on your authentication type, the Server tab 

•

may be entirely grayed-out (for instance, if you use MD5 authentication), or 

•

you may need to enter server-related information that you’ve already gathered on your worksheet (for TLS, TTLS, and 

PEAP).

7. When you’ve entered the server information, tap OK to save the configuration and close the window.

After you finish the initial configuration, tap the network interface and select Start (if the port is already active, select Stop first, 
then Start to force the program to read the new configuration file). On the main screen, you should see the port color and status 
change as the port starts authentication, negotiates with the access point and/or authentication server, and then joins the 
network.

As the network interface starts or stops, the color of the port icon and the status field in the Interface List updates to reflect the 
current state of the interface.

Gray

The port is not in use or is disabled.

Either the AEGIS Client isn’t running, or the port is not bound to 
the 802.1X protocol.