Honeywell International Inc. 950009 Manuale Utente

The following diagram displays the serial connector of the Mobile Base.  

Note: Signals referenced are for a DTE device.

The Mobile Base connector is straight to the printed circuit board (PCB). The ninth pin sends 500mA at 5V power out. This can 
power a peripheral device, such as a mobile printer, provided that that peripheral device can accept 500mA at 5V.

Communications Properties must be configured appropriately on the Dolphin 9500/9550 terminal for it to communicate with the 
Mobile Base.

To set Communications Properties:

1. Tap Start > ActiveSync > Tools > Options. 

2. Tap the PC Connection tab

3. Check the Enable Synchronization check box.