Honeywell International Inc. 950009 Manuale Utente
2 - 6
Dolphin® 9500/9550 Mobile Computer User’s Guide - GSM Draft
Using the Dolphin 9500/9550 for the First Time
Step 1. Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
•
Dolphin 9500/9550 mobile computer (the terminal)
•
Main battery pack (7.4v Li-Ion)
•
Microsoft Companion CD
•
Dolphin 9500 Quick Start Guide
Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details,
see
see
Each order includes a Dolphin Software Development Kit and User’s Guide CD; verify that you received this CD with your order.
If you ordered accessories for your terminals, verify that they are also included with the order.
If you ordered accessories for your terminals, verify that they are also included with the order.
The Dolphin 9500 Handstrap
The Dolphin 9500 ships with the handstrap installed and fastened with a clip on the bottom
panel; see
panel; see
To install the battery pack, you must
detach the handstrap.
To detach the handstrap, push the clip of the handstrap down and away from the terminal.
Move the strap up and away from the bottom panel.
Move the strap up and away from the bottom panel.
To re-attach the handstrap, slide the clip back into place on the bottom panel.
Step 2. Install the Main Battery Pack
Use only the Li-ion battery packs provided by HHP. The use of any battery
pack not sold/manufactured by HHP in the Dolphin 9500/9550 terminal will
void your warranty and may result in damage to the Dolphin terminal or
battery.
pack not sold/manufactured by HHP in the Dolphin 9500/9550 terminal will
void your warranty and may result in damage to the Dolphin terminal or
battery.
1. Unpack the Li-ion battery pack. Hold the terminal with the front panel (keyboard)
facing down. On the Dolphin 9500, detach the handstrap.
2. Take the battery and insert the end without the locking tab into the top of the battery
well and push down with a hinging motion until the locking tab snaps.
3. On the Dolphin 9500, re-attach the handstrap.
To Remove the Main Battery Pack
1. Detach the handstrap (on the 9500).
2. Press the locking tab on the battery pack away from the bottom panel, and pull the
battery pack up with a hinging motion.
Step 3. Charge the Main and Backup Batteries
The power supply for the Dolphin mobile computer consists of two types of battery power: the main battery pack installed on the
back panel and the backup battery that resides inside the terminal.
back panel and the backup battery that resides inside the terminal.
The main battery powers the terminal. The internal backup battery charges off the main battery and maintains the application
data stored in RAM and system clock for up to 30 minutes when the terminal’s main battery pack is completely discharged or
removed.
data stored in RAM and system clock for up to 30 minutes when the terminal’s main battery pack is completely discharged or
removed.
Before initial use - The terminals are shipped with both batteries discharged of all power. Charge the main battery pack for a
minimum of four hours before initial use.
minimum of four hours before initial use.
When installed in the terminal, the battery pack can be charged in the HomeBase, Mobile Base, or with the appropriate charging
cable. When not installed in the terminal, battery packs can be charged in the QuadCharger or the auxiliary well of the
HomeBase.
cable. When not installed in the terminal, battery packs can be charged in the QuadCharger or the auxiliary well of the
HomeBase.
Time to Charge - Four hours for the main battery pack, eight hours for the internal backup battery the first time.
Clip
Handstrap
!