Honeywell International Inc. 950009 Manuale Utente

1. Go to Start > Settings > System tab > Power. The power settings screen appears displaying the charge status of both the 

installed Li-ion battery pack and the NiMH backup battery inside the terminal. This screen also displays the Suspend Mode 
settings for the terminal.   

2. Select your time-out preferences from the drop-down lists. You can have both battery power and external power settings 

simultaneously.

3. Tap OK to save the changes and exit. 

To maintain optimal battery performance, follow the guidelines below when storing:

•

Avoid storing batteries outside the specified range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.

•

For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. 

The following are general guidelines for the safe use and disposal of batteries:

•

Use only the battery supplied, recommended, or approved by HHP. 

•

Replace a defective batteries immediately as it could damage the Dolphin terminal.

•

Never throw a used battery in the trash. It contains heavy metals and should be recycled according to local guidelines. 

•

Don’t short-circuit a battery or throw it into a fire. It can explode and cause severe personal injury.

•

Excessive discharge damages a battery. Recharge the battery when your terminal indicates low battery power.

•

Although your battery can be recharged many times, it will eventually be depleted. Replace it after the battery is unable to 
hold an adequate charge.

•

If you are not sure the battery or charger is working properly, please send it to HHP or an authorized HHP service center, for 
inspection.