Honeywell International Inc. MX2702 Manuale Utente
1 - 13
3. Connect the
appropriate
interface cable
to the base and
to the terminal/
computer and
keyboard.
interface cable
to the base and
to the terminal/
computer and
keyboard.
4. Turn the
terminal/
computer power
back on.
computer power
back on.
5. Program the
base for the
keyboard wedge interface. See
keyboard wedge interface. See
6. Verify the base operation by scanning a bar code from the
in the back of this manual.
Note: Without using the 9-volt external, power supply, the base only uses
enough power from the host to operate the interface. The scanner’s
battery is not charged when in this mode. Using the 9-volt, external power
supply allows the scanner’s battery to be charged, and no power is drawn
from the host.
battery is not charged when in this mode. Using the 9-volt, external power
supply allows the scanner’s battery to be charged, and no power is drawn
from the host.
Reading Techniques
The scanner has a view finder that projects a bright red aiming beam that
corresponds to its horizontal field of view. The aiming line should be centered
horizontally over the bar code; it will not read if the aiming line is in any other
direction.
corresponds to its horizontal field of view. The aiming line should be centered
horizontally over the bar code; it will not read if the aiming line is in any other
direction.
1
2
3
Good Read
Bad Read
Bad Read