Honeywell International Inc. QC900A Manuale Utente

Note: Batteries are factory replaceable only.  You must return your unit to Hand 

Note: The battery may be in an unknown charge state at delivery.  We 

recommend that you charge the battery for at least 6 hours prior to use.  
You may use the  while charging it.

1. Plug the power supply into the port on the back of the unit.

2. Plug in the power supply to the AC main source.

The QC890 Verifier uses a rechargeable battery.  The QC890 Verifier can be 
operated from the battery or power supply.  With a set of properly charged 
batteries, the unit operates for a minimum of 20 hours.  When not in use, you can 
leave the unit connected to the charger.

•

If the power supply is attached and plugged into a wall outlet, the QC890 
Verifier is on.

•

If the QC890 Verifier  is attached to the USB host with power on, the verifier 
is on.

•

If the QC890 Verifier is operating using the battery, it shuts itself off after 15 
minutes of inactivity to conserve battery power.  Pressing the scan button on 
top of the unit one time powers up the unit from the power down mode.

Dimensions

7” (18cm)W x 6”(15.cm)H x 5.4” (14cm)D

Weight

1 lb 8 oz (680 grams)

Temperature

Storage: -20° to 70°C
Operational: 0° to 50°C

Humidity

20% to 95% RH non condensing

Battery

Built-in factory - Lithium Ion rechargeable