Honeywell International Inc. QC900B Manuale Utente

Note: If you chose to use the USB or RS-232 interfaces, the Bluetooth 

communication interface automatically turns off.

The QC890 Verifier may be used with Bluetooth devices (e.g., laptop, PC, PDA, 
etc.).  Scanning the Bluetooth bar code below turns the Bluetooth option on in the 
QC890 Verifier.  

Default = Off.

Note: If you turn the Bluetooth option on, scan the appropriate bar code that 

follows to connect to a PC/Laptop or PDA/Mobility Systems device.

To establish a Bluetooth connection to a PC/Laptop, scan the bar code below, 
follow the instructions supplied with your Bluetooth device to locate the QC890 
Verifier, and connect to it.  If you go out of range with your QC890 Verifier, the 
QC890 Verifier automatically reconnects to the Bluetooth device once you come 
back in range. 

When Bluetooth communication is enabled, the default is PC/

Laptop.

To establish a Bluetooth connection to a PDA or Hand Held Products Mobility 
Systems device, scan the bar code below, follow the instructions supplied with 
your Bluetooth device to locate the QC890 Verifier, and connect to it.  If you go 
out of range with your QC890 Verifier, the QC890 Verifier will not re-connect.  It 
will be up to the host device to re-connect to the QC890 Verifier.

Bluetooth On

* Bluetooth Connection - PC/Laptop

Bluetooth Connection - PDA/Mobility Systems Device