Adtran TRC5045L1 Manuale Utente

Section 5  User Interface Guide

TRACER 5045 System Manual

 46

© 2003 ADTRAN, Inc.

612805045L1-1A

Provides a user-defined alphanumeric description (up to 25 characters) for the TRACER 5045 system.

Configures the modem control leads on the RS-232 port (terminal interface located on the rear panel of the 
unit). Set 

 to 

 when connecting the unit to a modem (using a null modem 

adapter). Setting 

 to 

 prevents the TRACER 5045 from monitoring DCD and 

enables data to be sent to the VT100 continuously. 

 must be set to 

 when the 

VT100 terminal is in use. The TRACER 5045 comes factory programmed with 

 set to 

.

Causes the TRACER 5045 to de-assert Clear To Send (CTS) and DSR for a time greater than 20 msec. 
This signals the modem to disconnect the analog connection. Hangup-On-DTR-Drop may need to be 
explicitly enabled on some modems. If 

 is 

, this menu also causes the unit 

to close the current session and return to the TRACER System Status menu page and wait for password 
input.

Configures password protection for the VT100 terminal interface. Password protection for the 
TRACER 5045 requires password input from the TRACER 5045 System Status menu page when 
connecting to the unit. When configured for password protection, the TRACER 5045 closes any terminal 
session that remains inactive for more than 10 minutes. The TRACER 5045 comes factory programmed 
with 

 set to 

. 

Sets the password for password protection of the TRACER 5045 VT100 terminal interface. Enter up to 8 
alphanumeric characters. The system password is case sensitive.

Resets all system error counters for the TRACER 5045.