Xmark Corporation WKP Manuale Utente
EXI ECO-Lite User Manual
980-000004-000
EXI Wireless Systems
8
May 2000
Revision
1.0
6. ECO-Lite Controller
The ECO-Lite has 3 lights to indicate status:
Green Yellow Red
(Standby) (Bypass) (Alarm)
(Standby) (Bypass) (Alarm)
Front View
• “GREEN LIGHT” indicates the power is on and the system is on standby.
• “RED LIGHT” FLASHING indicates an alarm is in progress (tag detected in range).
• “YELLOW LIGHT” & “RED LIGHT” alternately FLASHING indicates the system is in
BYPASS Mode.
Back View
Side View
8 Position rotary switch use to
set the ID address between the
keypad and controller.
set the ID address between the
keypad and controller.
Auxiliary Port: 1 set of N/O & N/C
relay contacts to drive external devices.
(cameras, sounders, magnetic locks)
relay contacts to drive external devices.
(cameras, sounders, magnetic locks)
Potentiometer used to adjust
the field detection zone (3’-12’)
Maximum: Fully Clockwise
the field detection zone (3’-12’)
Maximum: Fully Clockwise
Input power from
wall mount adapter
24V @ 500mA
wall mount adapter
24V @ 500mA
Back-up battery switches.
Shipped in OFF position. Turn
both switches ON to activate
back up battery supply.
Shipped in OFF position. Turn
both switches ON to activate
back up battery supply.