Accton Technology WBR143GN Manuale Utente
Service Settings
5-55
5
• DDNS – Enables DDNS. (Default: Disabled)
• DDNS Server Type – Specifies the DDNS service provider, DynDns.org,
• DDNS Server Type – Specifies the DDNS service provider, DynDns.org,
Non-IP.com, or ZoneEdit.com. (Default: DynDns.org)
• DDNS Username – Specifies your username for the DDNS service.
• DDNS Password – Specifies your password for the DDNS service.
• Confirmed Password – Prompts you to re-enter your chosen password.
• Hostname to register – Specifies the prefix to identify your presence on the DDNS
• DDNS Password – Specifies your password for the DDNS service.
• Confirmed Password – Prompts you to re-enter your chosen password.
• Hostname to register – Specifies the prefix to identify your presence on the DDNS
server.
• Submit – Saves and sends the enabled DDNS configuration to the DDNS server.
• Reset – Restores the previous DDNS configuration information.
• Reset – Restores the previous DDNS configuration information.
System Log Settings
The wireless AP/Router supports a logging process that controls error messages
saved to memory or sent to a Syslog server. The logged messages serve as a
valuable tool for isolating wireless AP/Router and network problems.
saved to memory or sent to a Syslog server. The logged messages serve as a
valuable tool for isolating wireless AP/Router and network problems.
The System Log Settings page controls the type of logging message that the
wireless AP/Router can send.
wireless AP/Router can send.
Figure 5-35. System Log Settings
• System Log – Enables local storage of system logs concerned with the wireless
AP/Router only. (Default: Disabled)
• Storage Type – Indicates where the
system log messages are to be stored.
(Default: RAM)
(Default: RAM)
Note: System log messages stored in RAM are cleared after a reboot.