Unitech Electronics Co. Ltd. HT580 Manuale Utente
Unitech Part Number: 400412
5
1.2. Device
Use MENU key to move cursor to one of item and then press ENTER (or SCAN key) or directly press
“1” ~ “3” to select target item:
“1” ~ “3” to select target item:
1.2.1. BACKLIGHT
HT580L’s backlight can be automatically on after key pressed and it will automatically off after
predefined period time if there is no more key pressed. Timeout period will be reset if any key is pressed.
In HT580L, timeout period can be set to 10/20/30 or 60 seconds. Or backlight can be set as always OFF
or ALWAYS on.
To set up the backlight, press MENU to adjust the setting. There are below options for choice
predefined period time if there is no more key pressed. Timeout period will be reset if any key is pressed.
In HT580L, timeout period can be set to 10/20/30 or 60 seconds. Or backlight can be set as always OFF
or ALWAYS on.
To set up the backlight, press MENU to adjust the setting. There are below options for choice
Item Description
On 10 SECS
On 10 SECS
Turn on backlight after key-pressing, and then
automatically turn off after 10 seconds
automatically turn off after 10 seconds
On 20 SECS
Turn on backlight after key-pressing, and then
automatically turn off after 20 seconds
automatically turn off after 20 seconds
On 30 SECS
Turn on backlight after key-pressing, and then
automatically turn off after 30 seconds
automatically turn off after 30 seconds
On 60 SECS
Turn on backlight after key-pressing, and then
automatically turn off after 60 seconds
automatically turn off after 60 seconds
Always
Always turn on backlight
Off
Always turn off backlight
BACKLIGHT selection : ON 10 SECS/ ON 20 SECS/ ON 30 SECS/ ON 60 SECS/ Always/ OFF
Selecting your preference and press [ENTER] to save the change. To go back to previous menu, press
[
Selecting your preference and press [ENTER] to save the change. To go back to previous menu, press
[
ESC
].
1.2.2. SCANNER
SCANNER selection: ON NORMAL/ON FLASH/OFF. Press [MENU] key to select your preference and
press [ENTER] (or [SCAN] key) to save the changes. To go back to the previous menu, press [
press [ENTER] (or [SCAN] key) to save the changes. To go back to the previous menu, press [
ESC
].
Below are explanation for those 3 options
ON
NORMAL
NORMAL
Standard operation way (one trigger on scan), scanning
beam will be emitted when press SCAN key and scanning
will be off when releasing SCAN key. Scanning beam will be
also off when it successfully read barcode
beam will be emitted when press SCAN key and scanning
will be off when releasing SCAN key. Scanning beam will be
also off when it successfully read barcode
ON FLASH
Press SCAN (and then immediately), scanner will
automatically continuously emit scanning beam and off
scanning beam until Enter flash mode after press SCAN key
(and then release SCAN key). User can press SCAN key
again to stop Flashing.
automatically continuously emit scanning beam and off
scanning beam until Enter flash mode after press SCAN key
(and then release SCAN key). User can press SCAN key
again to stop Flashing.
OFF
Turn off scanner. Scanning beam will not be emitted after
press SCNA key
press SCNA key
1. BACKLIGHT
2. SCANNER
3. AUTORUN
4. MEMORY
2. SCANNER
3. AUTORUN
4. MEMORY