Plantronics 70385-01 Manuale Utente



 

BlUEtootH Pairing

 

 

Before using your headset for the first time,  

you must pair it with another Bluetooth device, 

such as a mobile phone. Ensure the headset is 

fully charged.

 

Look in your Bluetooth device manual for the 

section that describes how to set up a Bluetooth 

wireless connection.

1. 

Move through the menu selections on your 

phone until the phone display shows “Look 

for Devices,” or equivalent, as a selection.

2. 

With your headset turned off, hold down the 

call control button until the headset status 

indicator briefly glows blue, then flashes red 

and blue. The headset is now in discovery 

mode and will stay that way for 30 seconds.

3. 

On your phone, highlight and select “Look 

for Devices,” or equivalent, to activate the 

scan for the headset.

4. 

When the phone display shows the scan 

results, select “6xx Plantronics”. The phone 

will continue to search for the headset.

5. 

When the phone display asks for a passkey, 

type “0000” and press Enter.

Your headset is now linked to your phone.

 

Using mUltiPoint (morE 

tHan onE BlUEtootH 

DEVicE)

 

 

Plantronics Discovery 640E supports multipoint 

technology, which permits simultaneous 

connections with two different Bluetooth  

audio devices.

TO PAIR ANOTHER Bluetooth DEVICE

 Repeat 

the previous pairing steps with the new device.

INITIATE A CALL

 The headset will assume you 

wish to initiate a call on the device recently 

used. 

TO USE THE SECOND DEVICE

 Initiate the call 

using the controls on the second device. The 

second device forms the link with the headset.

ANSWER A CALL

 An incoming call on either 

device will ring through the headset. In most 

cases, the ring tone from the device will 

transfer through to the headset, allowing the 

user to determine which device is ringing. In 

some cases, however, the headset applies a 

ring tone to the incoming call. In either case, 

the user may be able to determine which device 

is ringing through the distinct ring tone. 
To answer the call, press the call control 

button.

TO ANSWER A CALL ON ONE DEVICE WHILE 

TALkING ON THE OTHER

 There is no function 

for placing one call on hold while answering 

another. Therefore, to answer the second call, 

the first call must be terminated. 
Terminate the first call by pressing the call 

control button once.
Wait for the beep and then answer the second 

call by pressing the call control button again. If 

you choose not to answer the second call, and 

you have voice mail on the second device, the 

call will go to voice mail.