Honeywell International Inc. CTU-K05 Manuale Utente
Page 8
Attaching the Terminal Support Plate
INSTALLATION
Attaching the Terminal Support Plate
To attach the terminal support plate, drill two holes in the wall in which to
place the plastic anchors that hold up the support plate (see Figure 4). Make
sure that the box attached to the wall is aligned with the niche on the
lower part of the support plate (use a
place the plastic anchors that hold up the support plate (see Figure 4). Make
sure that the box attached to the wall is aligned with the niche on the
lower part of the support plate (use a
∅
6mm parallel tip flat head
screwdriver).
anchor
anchor
Figure 4: Terminal support plate