Honeywell International Inc. RV8310 Manuale Utente

In OFF mode the fireplace flame and fan are off. In ON mode the flame level and fan
speed can be adjusted by the user. In the AUTO mode the RT8220A is used as a
thermostat to allow the fireplace to automatically control the temperature of the room.

There are six buttons on the remote. The buttons are the mode, delay timer, flame, fan,
up, and down buttons. The mode button changes the operating mode of the RT8220A.
The delay timer enables or disables a shutoff timer function. The flame and fan buttons
are used to change the flame or fan levels. The up and down keys are used to change the
temperature setting or flame, fan, and delay timer values. Below is a detailed description
of how to use the RT8220A.

In the OFF mode, the display will show OFF and the room temperature. If the receiver is
in REMOTE mode, the fireplace will shut off.

In the ON mode, the room temperature, flame and fan levels will be shown. MANUAL
will appear next to both the flame and fan icons.

When the control is in the ON mode, the flame and fan levels, and delay timer are
changed with the up and down buttons. To change the flame level, press the flame button
followed by an arrow key. To change the fan level, press the fan key followed by an
arrow key. Pushing the arrow key once will change the level by one unit.

The shut off delay timer has a maximum of 2 hours and a minimum of zero minutes. To
change the timer level, press the time key followed by an arrow key. Pushing the key once
will change the timer by 10 minutes.

In the AUTO mode the room temperature, set temperature, flame, and fan levels will be
shown on the display. The word “AUTO” will appear next to both the flame and fan
icons.