Honeywell International Inc. TH8320WF01 Manuale Utente

Troubleshooting

•  Press

 to set system to Heat. Make sure the temperature is set 

higher than the Inside temperature.

•  Press

 to set system to Cool. Make sure the temperature is set lower 

than the Inside temperature.

•  Check circuit breaker and reset if necessary.

•  Make sure power switch at heating & cooling system is on.

•  Make sure furnace door is closed securely.

•  If “Wait” is displayed, the compressor protection timer is on. Wait 5 minutes

for the system to restart safely, without damaging the compressor (see page 

48).

•  Check Function 0170: System Type to make sure it is set to match your 

heating and cooling equipment (see page 54).