Honeywell International Inc. THM4000R02 Manuale Utente
© 2010 Mitsubishi Electric & Electronics USA, Inc.
Suwanee, GA 30024 All Rights Reserved.
The three diamond logo is a registered trademark
of Mitsubishi Electric Corporation
www.mitsubishipro.com
Controller Kit Installation Manual
MIFH1, MRCH1, MCCH1, MOS1
MIFH1, MRCH1, MCCH1, MOS1
69-2426-01
Installation guide for:
• Wireless Receiver and Cable (MIFH1)
• Remote Controller (MRCH1)
• Remote Controller (MRCH1)
• Portable Central Controller (MCCH1)
• Outdoor Air Sensor (MOS1)
• Outdoor Air Sensor (MOS1)
DISCONNECT POWER
BEFORE BEGINNING INSTALLATION. Can cause
electrical shock or equipment damage.
Must be installed by a trained, experienced technician. Read these
instructions carefully. Failure to follow these instructions can damage the product or
cause a hazardous condition.
instructions carefully. Failure to follow these instructions can damage the product or
cause a hazardous condition.
Installation at a glance
This document covers linking and
installation procedures for the
Mitsubishi Split-Zoning Ductless
and Ducted Systems' RedLINK™
control devices and accessories.
installation procedures for the
Mitsubishi Split-Zoning Ductless
and Ducted Systems' RedLINK™
control devices and accessories.
Before you begin, you must attach the cable to the CN105 connector on the indoor unit
control board, then follow the steps in this document.
control board, then follow the steps in this document.
Remote controllers are linked to specific indoor units. Each indoor unit must have a
dedicated remote controller and wireless receiver.
dedicated remote controller and wireless receiver.
Wireless receiver
Wireless
outdoor
air sensor
Portable
central
controller
M32309
Remote controller