The Whistler Group MCRX Manuale Utente

Specifications 

 

Dimensions:  

2.1” x 1.3” x 0.6”  

 

 

LED color: Red 

Weight: 

1.2 

oz 

     

Frequency: 433.92 MHz 

Power Requirements: (2) CR2450, lithium, coin cells 

Low Battery Indicator 

LED Boom length: 5.5”   

 

 

 

On/Off Switch 

Battery Life: Approximately x hours

 

(Please refer to Cruisader Owner’s Manual for Warranty Information) 

 

Battery Replacement 

 
1. Remove the screws from the rear cover. 
2. Remove the rear cover. 
3. Raise the LED end of the printed circuit board and slide it towards the LED to clear the 
switch from the housing. 
 
 
 
 
 
4. Raise the switch end of the printed circuit board to allow access to the batteries. 
5. Remove the assembly from the housing. 
 
 
 
 
 
 
6. Slide the top battery away from the slide switch and remove.  Raise the lower battery 
upward to clear the hole in the printed circuit board and slide it in a similar fashion. 
 
7. Insert the replacement battery 1 with the (-) contact into the hole in the printed circuit 
board.  Insert replacement battery 2 (+) contact up, onto the top of battery 1.  Replace the 
assembly into the housing in a reverse manner.