The Whistler Group SC04 Manuale Utente
20
Scanner Cloning
If you have access to a compatible
scanner that is already programmed for
your area, you can transfer that scanner's
programming using a standard stereo
patch cord (not included), terminated with
1/8” male stereo plugs at each end.
scanner that is already programmed for
your area, you can transfer that scanner's
programming using a standard stereo
patch cord (not included), terminated with
1/8” male stereo plugs at each end.
The PRO-652 is compatible with the
following scanner models: PRO-106,
PRO-197, PRO-651, PRO-652, GRE PSR-500, PSR-
600, Whistler WS1040, and WS1065.
following scanner models: PRO-106,
PRO-197, PRO-651, PRO-652, GRE PSR-500, PSR-
600, Whistler WS1040, and WS1065.
To clone a scanner:
1. Connect the two scanners at their PC/IF ports.
2. Turn on both scanners.
3. On the source scanner, press PROG.
4. Press the GLOB softkey.
5. Use the 4-direction keypad to locate the Clone
2. Turn on both scanners.
3. On the source scanner, press PROG.
4. Press the GLOB softkey.
5. Use the 4-direction keypad to locate the Clone
Send option.
6. Press SEL to transfer data.
NOTE: Working memory and global settings are
transferred but not V-Scanner folders. The target
scanner's working memory will be overwritten.
transferred but not V-Scanner folders. The target
scanner's working memory will be overwritten.