The Whistler Group SC04 Manuale Utente
42
Signal Stalker II Object (STLK)
Signal Stalker II can find distant or weaker signals. With
default settings, the STLK object will sweep through
important land mobile radio bands. As you become
more familiar with STLK operation, you can specify
bands to improve your search.
Because a STLK object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
default settings, the STLK object will sweep through
important land mobile radio bands. As you become
more familiar with STLK operation, you can specify
bands to improve your search.
Because a STLK object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new STLK object:
1. Press PROG.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the STLK softkey.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the STLK softkey.
5. Configure settings for the object. To restore the
default setting, press the
Dflt softkey.
6. Name your search in the Tag field.
7. To search while scanning, assign the object to a
7. To search while scanning, assign the object to a
scan list.
8. Press the Save softkey.
To begin a Signal Stalker II search:
1. Press MAN.
2. Use the 4-direction keypad to navigate to the
2. Use the 4-direction keypad to navigate to the
STLK object.
3. Press the STALK softkey (not the SRCH key on
the keypad).
4. Press the PAUSE key to hold on a transmission.
To resume, press the
PAUSE key again.
• Press the
FrL/O softkey lock out a frequency.
• Press the
STOR softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll