Leadtek Research Inc LR8M11 Manuale Utente

B

1. Overview

4. Basic Operations

Power on:  ress and hold the power 
button for 3 seconds to turn it on.
Power off: Press and hold the power 
button for 3 seconds to turn it off.
Standby: When the tracker is on, 
press the power button (Only lights 
are off; functions are still working).
Wake up: Press the power button in 
standby mode.
Security: When the tracker is awake, 
shake it to toggle on/off security, as 
the picture below.

P

5. Install the Tracker

1. On the bicycle

Recommended location:

Installation steps:

2. On the scooter

Installation with the 
included screws

Installation steps:

2. Charging

3. Install the SIM Card

1

 

 cable 

to the Micro USB charging port at 
the bottom of the tracker.

. Connect one end of the USB

2

 

cable to the power adapter and 
plug it into the wall socket, or 
directly connect the cable to the 
USB port on the computer.

. Connect the other end of the USB

Before installing the SIM

to

prevent the
locked. In case it’s locked for some 
reason, please contact your carrier.

 Card, 

 

 SIM Card from being 

to unlock the SIM Card Pin Code 

4

 slot cover with the SIM 

Card back in place.

. Put the

Power LED indicators:

Power on: Blue (steady)
Low power: Red (steady)
No power: Off
Charging: Red (flashes slowly)
Charging complete: Blue (steady)

Note: Please charge the battery for 

at least one hour when you 
use it for the first time to 
maximize the battery life.

Security LED (Orange)

GSM LED (Blue)

GPS LED (Blue)

Power Button and LED (Red/Blue)

SIM Card Slot

Micro USB Charging Port

(fastened around the bars below the saddle)

Note: Install the tracker with the face 

up to ensure better reception.

6. 

 

 

Reset the Tracker

3

 SIM Card 

with that on the slot cover and 
insert the SIM Card into the slot 
cover.

. Align the notch on the

1

Card Slot cover to open it.

. Pull the transparent film on the SIM 

2

the film on 
the cover.

. Remove 

To reset the tracker, remove the 
current SIM card in the tracker, insert 
another SIM card with a different 
phone number, and power on the 
tracker. The data in the tracker will be 
cleared and the tracker will be 
restored to factory default settings.

Model: LR8M11

Installation with the 
included Velcro