Leadtek Research Inc LR9821 Manuale Utente

 

                                                                                                                                                   

 

-  - 

6

off the receiver. Note: When the receiver is in the cradle, the 
receiver will switch off if the power to the cradle is interrupted or 
switched off (to synchronize with vehicle ignition). 

 

Low Power 

The left LED(LED 1) indicator will turn RED (normally BLUE) 
when battery power becomes low. Connect the receiver to a 
powers source to continue operation and to recharge the battery. 

Charging 

The right LED(LED 2) indicator will turn RED (or ORANGE) 
when the battery is being charged. When fully charged, the RED 
indicator will switch off. 

 

Waiting to connect 

The left LED(LED 1) indicator will flash if there is no 
communication between the receiver and another device.   

Connected 

The left LED(LED 1) indicator will turn to continuous lighting 
when the receiver is connected through the wireless link with 
another device. 

 

Navigating 

The right LED will flash GREEN (or ORANGE when charging) if 
the receiver is able to determine the current position. 

 

The PIN code means Personal Identification Number for Bluetooth device and it is also 

called as Pass Key. The Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generally 
speaking, there are two steps in Bluetooth connecting. One is pairing process, the other is link process. 
If you need PIN code to pairing and connect, you can use the default pin code, “0000” to connect 
Bluetooth device. Our GPS receiver belongs to non-safety connecting, you can use in general 
application to finish connecting.