Leadtek Research Inc LR9822 Manuale Utente

                                                                                                                                                   

 

-  - 

4

Turn on 

To turn on the receiver, please switch the power slide switch to 

“ON” side. You can see the LED1 flash blue color once and wait a 

moment (about 10 seconds) to turn on the power. At the same time 

LED1 will flash blue to wait Bluetooth connection.   

Turn  off                                  To turn off the receiver, please switch the power slide switch to 

“OFF” side. You can see the all LED dark. 

 

Low Power 

The left LED(LED 2) indicator will show red when Lithium-Ion 

battery power becomes low.   

Charging 

The left LED(LED 2) indicator will turn green when the battery is 

being charged. When fully charged, the green indicator will switch 

off. 

 

Waiting to connect 

The right LED(LED 1) indicator will flash if there is no 

communication between the receiver and another device.   

Connected 

The right LED(LED 1) indicator will turn to continuous lighting 

when the receiver is connected through the wireless link with 

another device. 

 

The  PIN  code means Personal Identification Number for Bluetooth device. The 

Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generally speaking, there are two 

steps in Bluetooth connecting. One is pairing process, the other is link process. If you need PIN code 

to pairing and connect, you can use the default pin code, “0000” to connect Bluetooth device. Our 

GPS receiver belongs to non-safety connecting, you can use in general application to finish 

connecting.