Powerwave Technologies Inc. DPA4040E Manuale Utente

 

1590 Buckeye Drive

Milpitas, CA 95035

REMEC Model DPA-4040E 

 

DPA-4040E

 

User Manual Rev 3                                                                                 Page 2 of 4 

 

1.5  Adjust the input power level to ensure the output power level is in compliance with the 

values indicated in Table 1 or Table 2 depending upon the mode of operation (Combined 
or Isolated). 

 

1.6  To comply with the FCC limits at the second harmonic, 20 dB minimum rejection must be 

provided between the DPA and free space. Any or all of the following system elements 
can be utilized to provide the required rejection: 

 

1.6.1 A 

transmit 

filter 

1.6.2 A 

transmit 

duplexer 

 
 
 
 
 
 
 
 
 

 

The user must adjust the RF input power to the Booster Amplifier such that the RF 

output power level does not exceed the FCC certified power levels.  The FCC certified 

power level is determined by the RF output spectral emissions to be compliant with the 

FCC spurious emissions limit of -13 dBm outside of the assigned frequency block.  

Near the block edges, the Edge and GMSK signal is such that the output power level 

must be further reduced so that the  -13 dBm spurious level is not exceeded. 

These levels must not be exceeded for FCC compliance.