ZyXEL Communications Corporation G162 Manuale Utente
ZyXEL G-162 Quick Start Guide
5
LED COLOR STATUS
DESCRIPTION
On
The ZyXEL G-162 is receiving power.
PWR Green
Off
The ZyXEL G-162 is not receiving power.
Blinking
The ZyXEL G-162 is receiving or sending data.
LINK Green
Off
The ZyXEL G-162 is not receiving or sending data.
Troubleshooting
PROBLEM CORRECTIVE
ACTION
Make sure the ZyXEL G-162 is inserted into the computer
CardBus slot properly and then restart your computer. Check
the LEDs on the ZyXEL G-162.
CardBus slot properly and then restart your computer. Check
the LEDs on the ZyXEL G-162.
Perform a hardware scan by clicking Start, Settings, Control
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyXEL G-
162 and install the driver.
Panel and double-clicking Add/Remove Hardware. (Steps
may vary depending on the version of Windows).
Follow the on-screen instructions to search for the ZyXEL G-
162 and install the driver.
Check for possible hardware conflicts. In Windows, click Start,
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the ZyXEL G-162 under
Network Adapter. (Steps may vary depending on the version
of Windows).
Settings, Control Panel, System, Hardware and then click
Device Manager. Verify the status of the ZyXEL G-162 under
Network Adapter. (Steps may vary depending on the version
of Windows).
Windows does not
auto-detect the
ZyXEL G-162.
auto-detect the
ZyXEL G-162.
Install the ZyXEL G-162 in another computer. If the error
persists, you may have a hardware problem. In this case, you
should contact your local vendor.
persists, you may have a hardware problem. In this case, you
should contact your local vendor.
or
C ertifications . F or more information about your devices Declaration of C onformity (DO C ) pleas e refer to www.zyxel.com