ZyXEL Communications Corporation NWD271N Manuale Utente
Chapter 4 ZyXEL Utility - Windows
NWD271N User’s Guide
54
4.4.1 Security Settings
When you configure the NWD271N to connect to a network with wireless security activated
and the security settings are disabled on the NWD271N, the screen varies according to the
encryption method used by the selected network.
and the security settings are disabled on the NWD271N, the screen varies according to the
encryption method used by the selected network.
4.4.1.1 WEP Encryption
Configure WEP security in this screen.
Figure 29 Security Setting: WEP
The following table describes the labels in this screen.
MAC address
This field displays the MAC address of the wireless device.
Surveyed at
This field displays the time when the wireless device was scanned.
Table 7 Site Survey (continued)
LABEL
DESCRIPTION
Table 8 Security Setting: WEP
LABEL
DESCRIPTION
Security Settings
WEP
Select 64 Bits or 128 Bits to activate WEP encryption and then fill in the related
fields.
fields.
Authentication
Type
Type
Select an authentication method. Choices are Open and Shared.
Refer to
Refer to
Section 3.3.1.1.2 on page 39
for more information.
Pass Phrase
Enter a passphrase of up to 32 case-sensitive printable characters. As you enter
the passphrase, the NWD271N automatically generates four different WEP keys
and displays the first in the key field below. Refer to
the passphrase, the NWD271N automatically generates four different WEP keys
and displays the first in the key field below. Refer to
Section 3.3.1.1.1 on page 39
for more information.
Transmit Key
Select a default WEP key to use for data encryption. The key displays in the
adjacent field.
adjacent field.