ZyXEL Communications Corporation P873HNUP51B Manuale Utente
Chapter 10 Quality of Service (QoS)
P-873HNUP-51B User’s Guide
152
10.7 The QoS Monitor Screen
To view the ZyXEL Device’s QoS packet statistics, click Network Settings > QoS > Monitor. The
screen appears as shown.
screen appears as shown.
Figure 58 Network Settings > QoS > Monitor
Committed
Burst Size
Burst Size
Specify the committed burst size for packet bursts. This must be equal to or less
than the peak burst size (two rate three color) or excess burst size (single rate
three color) if it is also configured.
than the peak burst size (two rate three color) or excess burst size (single rate
three color) if it is also configured.
This is the maximum size of the (first) token bucket in a traffic metering algorithm.
Conforming
Action
Action
Specify what the ZyXEL Device does for packets within the committed rate and
burst size (green-marked packets).
burst size (green-marked packets).
•
Pass: Send the packets without modification.
•
DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark
value to use.
value to use.
Non-
Conforming
Action
Conforming
Action
Specify what the ZyXEL Device does for packets that exceed the excess burst size
or peak rate and burst size (red-marked packets).
or peak rate and burst size (red-marked packets).
•
Drop: Discard the packets.
•
DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark
value to use. The packets may be dropped if there is congestion on the network.
value to use. The packets may be dropped if there is congestion on the network.
Available Class
Selected Class
Select a QoS classifier to apply this QoS policer to traffic that matches the QoS
classifier.
classifier.
Highlight a QoS classifier in the Available Class box and use the > button to move
it to the Selected Class box.
it to the Selected Class box.
To remove a QoS classifier from the Selected Class box, select it and use the <
button.
button.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.
Table 39 Policer Setup: Add/Edit (continued)
LABEL
DESCRIPTION