ZyXEL Communications Corporation VMG1312T10C Manuale Utente
Chapter 25 Remote Management
VMG1312-T10C User’s Guide
212
25.6 DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.
versa.
Use this screen to set from which IP address the Device will accept DNS queries and on which
interface it can send them your Device’s DNS settings. This feature is not available when the Device
is set to bridge mode. Click Maintenance > Remote MGMT > DNS to change your Device’s DNS
settings.
interface it can send them your Device’s DNS settings. This feature is not available when the Device
is set to bridge mode. Click Maintenance > Remote MGMT > DNS to change your Device’s DNS
settings.
Figure 147
Maintenance > Remote MGMT > DNS
The following table describes the labels in this screen.
IPv4 Trap
Destination
Destination
Type the IPv4 IP address of the station to send your SNMP traps to.
IPv6 Trap
Destination
Destination
Type the IPv6 IP address of the station to send your SNMP traps to.
Apply
Click Apply to save your changes back to the Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 89
Maintenance > Remote MGMT > SNMP (continued)
LABEL
DESCRIPTION
Table 90
Maintenance > Remote MGMT > DNS
LABEL
DESCRIPTION
Server Port
This displays the service port number for accessing the Device. If the number is grayed
out, it is not editable.
out, it is not editable.
Access Status
Select the interfaces through which a computer may send DNS queries to the Device.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to send DNS queries to the Device.
Select All to allow any computer to send DNS queries to the Device.
Choose Range to just allow the computers with an IP address in the range that you
specify to send DNS queries to the Device.
specify to send DNS queries to the Device.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.