ZyXEL Communications Corporation WRE2205 Manuale Utente
Chapter 1 Introduction
WRE2205 User’s Guide
11
1.4 The WPS Button
The WPS button can be used to reset the WRE2205 to factory default configuration (see
) or to begin WiFi Protected Setup (WPS).
1.4.1 WiFi Protected Setup
Your WRE2205 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the WiFi Alliance.
wireless network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
Depending on the devices you have, you can either press a button (recommended) on the device
itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that
allows one device to authenticate the other) in each of the two devices. When WPS is activated on
a device, it has two minutes to find another device that also has WPS activated. Then, the two
devices connect and set up a secure network by themselves.
itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that
allows one device to authenticate the other) in each of the two devices. When WPS is activated on
a device, it has two minutes to find another device that also has WPS activated. Then, the two
devices connect and set up a secure network by themselves.
For more information on using WPS, see
Wi-Fi
Blinking
The WRE2205 is sending/receiving data through the wireless LAN.
Off
The wireless LAN is not ready or the LED is turned off in the firmware.
Power
On
The WRE2205 is receiving power and functioning properly.
Blinking
The WRE2205 is resetting to factory defaults.
Off
The WRE2205 is not receiving power or the LED is turned off in the firmware.
WPS
On
WPS status is configured.
Blinking
The WRE2205 is negotiating a WPS connection with a wireless client and an
AP.
AP.
Blinking
Rapidly
Rapidly
WPS error
Off
The WPS status is not configured or the LED is turned off in the firmware.
LAN
On
The WRE2205 has a successful 10/100MB LAN connection.
Blinking
The WRE2205 is sending/receiving data through the LAN.
Off
The LAN is not connected.
Table 1
Front Panel LEDs and WPS Button (continued)
LED
STATUS
DESCRIPTION