ZyXEL Communications Corporation WRE2205 Manuale Utente
Chapter 5 Tutorials
WRE2205 User’s Guide
31
5.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both WRE2205’s configuration
interface and the client’s utilities.
interface and the client’s utilities.
1
Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
to get a PIN number.
2
On the WRE2205, navigate to the Network > Wireless LAN > WPS Station screen.
3
In the WRE2205’s Web Configurator, select Registrar in Config Mode.
4
In the WRE2205’s Web Configurator, enter the PIN number in the Input client PIN code.
5
Click the Start buttons (or the buttons next to the PIN fields) on both the wireless client utility
screen and the WRE2205’s WPS Station screen within two minutes.
screen and the WRE2205’s WPS Station screen within two minutes.
The WRE2205 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the WRE2205 securely.
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the WRE2205 securely.
The following figure shows an example of how to set up wireless network and security on WRE2205
and wireless client (ex. NWD210N in this example) by using PIN method.
and wireless client (ex. NWD210N in this example) by using PIN method.