COOPER INDUSTRIES INC OEM2400MR Manuale Utente
Title
- 4 -
Revision 0.1
Subject
Company Confidential: OMNEX Control Systems ULC.
1 Introduction
The OEM2400MR transceiver module is not sold separately as a stand alone device. It is
intended to be used as part of a complete OMNEX telemetry device and in the user manual
for any device containing the module will be included the text from the following page.
intended to be used as part of a complete OMNEX telemetry device and in the user manual
for any device containing the module will be included the text from the following page.
This manual is for the use of professionals to guide them in the installation, operation and
basic system maintenance of the equipment covered.
basic system maintenance of the equipment covered.
2
FCC Notice, U.S.A.
OEM-2400-MR complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
Caution - Changes or modifications not expressly approved by the OMNEX Control Systems
ULC will void the user’s authority to operate the equipment.
3 IC Notice, Canada
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
this device must accept any interference, including interference that may cause undesired operation of
the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
4 RF
Exposure
Information
READ THIS INFORMATION BEFORE INSTALLING THE OEM900MR
This product is intended for fixed installation applications. In order to comply with FCC/ISC
adopted RF exposure requirements, installation of this transmitter system's antennas must be
performed in a manner that will provide at least 20 cm (7.88 inches) clearance from the
antenna to any user or member of the public.
OEM-2400-MR was certified with a Linxs Technologies ANT-2.4-SW-CT-RPS ½ wave dipole
antenna with a 46 cm (18 inch) cable.
The maximum radiated output power of these antennas satisfies the maximum permissible
exposure (MPE) limits as specified in §1.1310 of FCC regulations for general
population/uncontrolled exposure as long as the minimum separation distance of 20 cm (7.88
inches) between the radiating element and the person is maintained
This product is intended for fixed installation applications. In order to comply with FCC/ISC
adopted RF exposure requirements, installation of this transmitter system's antennas must be
performed in a manner that will provide at least 20 cm (7.88 inches) clearance from the
antenna to any user or member of the public.
OEM-2400-MR was certified with a Linxs Technologies ANT-2.4-SW-CT-RPS ½ wave dipole
antenna with a 46 cm (18 inch) cable.
The maximum radiated output power of these antennas satisfies the maximum permissible
exposure (MPE) limits as specified in §1.1310 of FCC regulations for general
population/uncontrolled exposure as long as the minimum separation distance of 20 cm (7.88
inches) between the radiating element and the person is maintained