COOPER INDUSTRIES INC OEM900MR Manuale Utente
RF Exposure Information
READ THIS INFORMATION BEFORE INSTALLING THE OEM900MR
This product is intended for fixed installation applications. In order to comply with
FCC/ISC adopted RF exposure requirements, installation of this transmitter system's
antennas must be performed in a manner that will provide at least 8 inches (20 cm)
clearance from the antenna to any user or member of the public.
OEM900MR was certified with the following antennas: RAD-ISM-900-ANT-OMNI-0-6
(¼ Wave Whip Antenna with 1.8 m (6 ft.) Cable) and YA6900W (4 Element, 8dBi, Yagi
with 20 ft. (6m) Cable).
This product is intended for fixed installation applications. In order to comply with
FCC/ISC adopted RF exposure requirements, installation of this transmitter system's
antennas must be performed in a manner that will provide at least 8 inches (20 cm)
clearance from the antenna to any user or member of the public.
OEM900MR was certified with the following antennas: RAD-ISM-900-ANT-OMNI-0-6
(¼ Wave Whip Antenna with 1.8 m (6 ft.) Cable) and YA6900W (4 Element, 8dBi, Yagi
with 20 ft. (6m) Cable).
The maximum radiated output power of these antennas satisfies the maximum
permissible exposure (MPE) limits as specified in §1.1310 of FCC regulations for general
population/uncontrolled exposure as long as the minimum separation distance of 20cm
between the radiating element and the person is maintained
permissible exposure (MPE) limits as specified in §1.1310 of FCC regulations for general
population/uncontrolled exposure as long as the minimum separation distance of 20cm
between the radiating element and the person is maintained