COOPER INDUSTRIES INC T100-900 Manuale Utente

4

B. TOGGLE
Each output pair is independently toggled and latched.  Every time a button is pressed, its
corresponding output toggles.  In the event of loss of carrier, the status of the output will
either retain its state or turn OFF depending on the POWER ON mode selected.

Each of the 8 outputs are paired.  Within each pair, only one output can be on at one time
(ie. interlocked).  The default outputs shall be odd numbers OFF and even numbers ON.
Whether the pairs retain last state or default upon loss of carrier shall depend on the
POWER ON mode selected.

2.1.3 Link 

Mode

Sends out all configuration data including the factory programmed ID to the desired receiver

2.1.4 Security 

Configuration

In certain cases it may be desirable to prevent accidental use of the unit by preventing anyone
except authorized personnel to activate the unit.  Entering the SECURITY MODE shall enable a
user to program in a unique 4 digit startup ID.  This ID must be entered while simultaneously
depressing the ON switch.

During normal operation, the unit will function like an 8 channel transmitter. The specific
functions of each button is defined during device configuration.

TX Power

10mW

Supply Voltage

3.3 – 10 VDC

Current

< 20mA on transmit; 2mA on standby

Data Rate

4800 bps